Tennsco Add-On Bookcase B-8401, Tennsco B-8401 Unassembled Bookcase

Tennsco bookcase & case style files offer the ultimate in flexibility and value. Shipped to you knocked down, assembly is easy. The B-8401 Bookcase provides reliable storage at an affordable price.

This heavy-duty bookcase comes with a heavy-duty frame, high shelf capacity, easy adjustability, and easy expansion providing you the best in class experience and is ideal for all home and workspace environments.

84" High KD Add-On Bookcase - B-8401 features:

• Ready to Assemble: Easy assembly using only one tool, which is included with each unit.
• High Shelf Capacity: Reinforced shelf holds up to 200 pounds.
• Double Wall Construction: Keeps materials from slipping behind the uprights.
• Easy Adjustability: Shelves adjust on 2" centers, allowing for large items, such as binders, to be easily stored.
• Slotted for Dividers: Shelves are slotted on 1" centers for
• placement of dividers.
• Easily Expanded: Simply remove the end panel and attach units together.
• Extra Wide Units: 34 5 / 8 " inside width provides plenty of filing space.
• Raised Base: Base keeps books and files off the floor to prevent damage from cleaning solutions and equipment.
• Material: KD Bookcases, as well as all Tennsco Products, are fabricated of high quality, cold rolled carbon steel, free of scale or rust, and fully pickled. Exposed edges, corners, and surface areas are free of sharp edges and all workmanship is of the highest quality as measured by the industry.
• Finish: All steel components shall be thoroughly cleaned and phosphatized for rust resistance in a five-stage pre-treatment process. A high grade of polyester/epoxy powder paint is to be applied electrostatically with a gloss reading of between 55 and 65. The finish shall have a salt spray rating of 250 hours or more.
• Uprights: One upright is required for each side. They have made from 19 gauge, commercial grade, cold rolled steel. They have two rows of slots from top to bottom, every 1 1 / 2 ”, to receive the shelves. Holes are provided for assembly with screws.
• End Panels: End panels are stamped from 22 gauge cold rolled steel, front edge is double bent, rear has a single flange. All holes are provided for screw assembly. The panels are enamel painted. They are only required for end uprights.
• Back: The back is stamped from 20 gauge flat, cold rolled steel, with holes for assembly and painted with enamel.
• Top: The top is made from 20 gauge steel, with a double bend on the front edge. There are two brackets welded to the top near the front to fasten the top of the uprights. This results in a very strong corner construction.
• Shelves: Shelves are made from 20 gauge cold rolled steel, front and back edges are double bent for strength. Two inch long slots are punched in the center of the shelf from end to end, spaced 1” apart, these are used with the dividers. Shelves have a welded hat channel, slotted to match the shelf and used also to support the dividers. The shelf has four stops to lock it into the slots of the uprights.
• Base: The base is formed from 20 gauge cold rolled steel and is 3” high and used as the bottom shelf. It also has the row of slots 3 / 32 ” x 2”, spaced 1” apart to support the dividers. It’s underside has an identical hat section welded to it, with slots aligned to support the dividers. All holes are provided for assembly.
• Bookstops and Dividers: Stamped from 16 gauge cold rolled steel to fit into the slots of the shelves and base.
• Tie Plates: Both front and rear tie plates are made from 16 gauge cold rolled steel and pierced to accept Tinnerman Nuts
• Brand: Tennsco
• Manufacturer: Tennsco
• Model: B-8401
• Manufacturer Part Number: B-8401